Dt labs playbackpro plus usb controllers1/26/2024 Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software.Device shall support SFTP and SSH for secure communication between the control processor and TouchLink Pro touchpanel.The device’s configuration and settings shall be managed using Extron’s Toolbelt software.Shall be configured or programmed by an Extron authorized user.The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.User interface shall be created using Extron’s GUI Designer software.Device shall be weighted and have an optimized viewing angle of 65°.Device shall have the ability to sit on a tabletop that can be secured using the threaded holes in the base of the touchpanel while using owner furnished screws.Device shall have the ability to be controlled by an HTML5 and JavaScript or Silverlight enabled web browser, or an iOS or Android based device as a secondary point of control.Device shall have the following memory available, at minimum:.Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP.Device shall include a multi-function button located on the bottom of the enclosure hidden behind a removable door that allows for the reset of the device or its communication properties at minimum.Device shall have a menu button located on the bottom of the enclosure hidden behind a removable door for setup of items such as IP address and sound volume at minimum.Provide a front panel status LED that blinks red if the touchpanel loses network connectivity with the control processor.Provide a light sensor located on the top bezel of the touch surface that automatically adjusts the LCD screen’s backlight based on available ambient light.Provide a built-in motion sensor located on the top bezel of the touch surface allowing the panel to be woken from a sleep state or set up via software to trigger any number of actions.Provide a total of two integrated red/green LED status lights - one located on the front-bottom center of the enclosure and the second located on the back-top center of the enclosure, both of which can be configured or programmed.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |